Bu-353 Gps Driver

Posted on  by 

The bu-353-s4 is a usb magnet mount gps receiver that features a highly sensitive, low power consumption chipset in an ultra-compact form factor compatible with microsoft windows 10, 8, as well as 7, vista & xp. Gps receiver with the euronav supplied usb-serial adapter driver is applicable. The GpsGate software will assign multiple COM Ports for the BU-353. Write down or note the numbers of the COM Ports listed and click Finish. Open the DeLorme software. Within the DeLorme application, choose Options at the top of the software and then the GPS tab. Select Generic NMEA for the device and then one of the COM Ports that were listed. The BU-353S4, by USGlobalSat, GPS Receiver can be utilized in a variety of applications. With a non-slip base and compact design, the BU-353-S4 is completely self-contained and waterproof. It incorporates the latest SiRF Star IV GPS chipset and a 48-channel antenna so you receive the highest degree of GPS accuracy.

2,298 downloads·Added on: September 4, 2016·Manufacturer: MICROSOFT
The package provides the installation files for Microsoft USB GPS Port Driver version 3.0.1.0.
Bu-353 Gps DriverIf the driver is already installed on your system, updating (overwrite-installing) may fix various issues, add new functions, or just upgrade to the available version. Take into consideration that is not recommended to install the driver on Operating Systems other than stated ones.

Gps Bu-353 Driver Windows 8 Download

Bu-353 Gps Driver

In order to manually update your driver, follow the steps below (the next steps):

Bu-353 Gps Driver Windows 7

1. Extract the .cab file to a folder of your choice
2. Go to Device Manager (right click on My Computer, choose Manage and then find Device Manager in the left panel), or right click on Start Menu for Windows 10 and select Device Manager
3. Right click on the hardware device you wish to update and choose Update Driver Software
4. Choose to select the location of the new driver manually and browse to the folder where you extracted the driver
5. If you already have the driver installed and want to update to a newer version got to 'Let me pick from a list of device drivers on my computer'
6. Click 'Have Disk'
7. Browse to the folder where you extracted the driver and click Ok

About Device Driver:

Gps Bu 353 Driver Download


If you install this package, your device will be properly recognized by compatible systems, and might even benefit from new features or various bug fixes.
Please note that, even though other operating systems might also be compatible, we do not recommend you apply any software on platforms other than the specified ones. Doing so might cause the installation to crash, which could even render the device unusable.
When it comes to installing the package, the steps should not be much of a hassle because each manufacturer tries to make them as easy as possible; usually, you must make check for compatibility, get the package, run the available setup, and follow the instructions displayed on-screen.
However, due to the large number of devices out there and the various ways for applying these packages, it would be best if you refer to the installation manual first, to be sure of a successful update.
That being said, click the download button, and apply the present software on your product. Also constantly check with our website to stay up to speed with latest releases.

Bu-353 Gps Driver

It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

COMPATIBLE WITH:
Windows Vista 64 bit
Windows 7 64 bit
Windows 8 64 bit
Windows 8.1 64 bit
file size:
97 KB
filename:
20063221_dedeeb0baad9306809ee14e071f7b0da10f3db34.cab
CATEGORY:
Other Drivers & Tools

Coments are closed